10 Electronics DIY Kits and Modules to Experiment With

10 Electronics DIY Kits and Modules to Experiment With

This blog is about the 10 Electronics DIY Kits and Modules to Experiment With. We will try our best so that you understand this guide . I hope you like this blog 10 Electronics DIY Kits and Modules to Experiment With. If your answer is yes then please do share after reading this.

Check 10 Electronics DIY Kits and Modules to Experiment With

DIY electronics used to be the domain of super geeks, but in recent years Arduino and the Raspberry Pi have spawned a whole new culture, and now it’s easier than ever to get started experimenting and building DIY electronics projects. From Arduino and Arduino compatible boards to complete DIY electronics kits, there is something for everyone.

However, with so many modules and kits available on the market, it can be a bit confusing if you are not well versed in the subject. While it’s probably impossible to compile a definitive list of must-haves, it’s always good to have a place to start. Here is a list of 10 fun kits and modules You should try it.

Small pieces

LittleBits is an open source electronic module library that simply snap in with magnets. LittleBits modules can be combined to create a wide variety of different devices and projects.

There are several different LittleBits kits available to purchase, but you can also purchase individual modules, as well as accessories such as mounting plates and USB cables.

exist 3 kits for beginners to choose from, as well as a Space kit designed in collaboration with NASA, and a Synthesizer kit designed in collaboration with Korg. With all the options available, it’s easy to get a little confused and not know where to start with LittleBits.

Fortunately, the official LittleBits website has a great repository of projects you can do, complete with instructions, to help you familiarize yourself with what you can and cannot do with the LittleBits kit.


The MeArm is a open source robotic arm design which is designed to help children and adults learn and develop an interest in technology and programming.

MeArm is a low cost but high quality robotics kit that allows you to get started in the world of robotics in an easy but fun way. You can use various platforms with it, including Arduino, Raspberry Pi, Espruino, Beaglebone Black, and many more.

In addition to being an open source hardware platform, the fact that MeArm has Arduino at its core means that it will be incredibly easy to reprogram to do other things.

Hummingbird duo

The hummingbird duo is two boards in one– The original Hummingbird controller, as seen in the Hummingbird Robotics kit, on the one hand, and an Arduino Leonardo on the other.

The new dual design means you can use the Duo exactly like the original Hummingbird controller, or as an Arduino board with additional motor and servo protector, as well as improved connectors, all of which are provided by the Hummingbird controller.

Like the previous Hummingbird, the Hummingbird Duo has been designed to be easy and fun for all age groups. Hummingbird’s CREATE Lab visual programmer makes it incredibly easy to start programming.

exist 2 kits available, the Base and Premium kits, and the components in these kits include an HS-311 Servo, Pololu Gear Motor, and other useful components.

Digispark Pro

The Digispark Pro is a compact and cheap Arduino development board USB ready. The Digispark Pro is an improvement over the old Digispark – it still supports all 25+ shields from the original Digispark, but with additional capabilities and features.

The Digispark Pro is easier to use and program, has more pins and space for programs, and adds features like WiFi, Bluetooth and BLE shields. The Digispark Pro too ready for mobile developmentand it comes with examples for Android and iPhone.

The Digispark Pro has a number of cool USB-related features. First, use the new Micronucleus USB bootloader to easy programming via USB, directly from the Arduino IDE or command line.

In addition, the Digispark Pro can also emulate a USB serial port as well as various USB devices such as USB keyboards, mice and joysticks, and a generic HID device.


The GoPiGo is a complete robotics kit for Raspberry Pi, allowing you to turn your Pi into a mobile robot, complete with wheels, motors, controls, and your own robust and reliable power supply. Also comes with an acrylic body so you don’t have to worry about buying or building your own.

However, keep in mind that the GoPiGo itself doesn’t do much more than turn your Pi into a mobile robot; It is up to you to harness the power of the Raspberry Pi to make the robot truly functional and useful.

The GoPiGo also comes with its own modified Raspbian operating system, included in the kit. The acrylic body was also designed with the Raspberry Pi camera in mind and offers two camera mounting optionsEither on the body or on a servo camera mount that will also rotate 180 degrees.

The GoPiGo was designed with easy assembly in mind and can be assembled with just a screwdriver and about 10 minutes of your time.

Spark Core

Spark Core is an Arduino compatible development platform powered by a powerful ARM Cortex M3 running at 72MHz. Also, the Spark Core is Wi-Fi enabled, I leave you program the Spark Core wirelessly. It also has cloud functionality with the Spark cloud.

Spark Cloud allows you to access your projects from anywhere in the world, but it also gives you access to the unique features of Spark Core REST API, which allows you to write software for mobile devices, computers, and web applications that interact with your hardware projects.

The Spark Core WiFi controller uses the new CC3000 from Texas Instruments, with a Smart configuration technology that facilitates the connection of projects to the Internet.

As with most devices of this type, the Spark Core is fully open source, with all hardware design files freely available, plus it is also based on open source standards and protocols.

Touch board

The Touch Board is an Arduino compatible device that allows you to translate touch into sound and many other things. Basically, it is a circuit that you can use to integrate interactivity and tactile feedback in a project, with the help of electrical paint or any other type of conductive material.

Just connect this conductive material to any of the 12 electrodes on the touch board, and the touch board will trigger an action – basically anything you can program with an Arduino – when this conductive material is touched.

The Touch Board has both touch and distance sensing functionality, and also functions as a MP3 player or MIDI device, translating touch into sound.

There is even a Micro SD slot so you can completely change the sounds the Touch Board will make just by swapping the SD card. It has a 3.5mm audio out jack and also HID capable, so you can use it as a keyboard or mouse.


TinyDuino is a complete series of Arduino compatible boards, the biggest attraction is its incredibly small size. TinyDuino boards have the same processing power as an Arduino Uno, but are smaller than a quarter of the United States, making them incredibly suitable for projects where space is at a premium.

This small size is achieved by reducing each module to the basics and making them incredibly modular. TinyDuino modules come in 20 x 20mm squares, but most modules can be cut into circular shapes.

There’s a respectable number of modules available in the TinyDuino range, from the basic core processor board to various shields, such as a MicroSD shield, a WiFi shield, a GPS shield, and a USB and ICP shield.

TinyDuino modules use small, inexpensive connectors that still support all the signals that a standard Arduino shield requires.

Final words: 10 Electronics DIY Kits and Modules to Experiment With

I hope you understand this article 10 Electronics DIY Kits and Modules to Experiment With, if your answer is no then you can ask anything via contact forum section related to this article. And if your answer is yes then please share this article with your family and friends.

Bollyinside - Get Daily Blogs From Experts