You have a problem on your hands if your device continues to restart itself and gets caught in a loop. A predicament for which we do have a remedy. In this article we will discuss about the How to Fix ‘Xiaomi Phone Stuck in Recovery Mode’ issue. The boot-loop issue affects a significant number of users all over the world. Mobile devices are mired in a never-ending cycle. Users are unable to complete their tasks using the device when it is in such a state. It is becoming increasingly difficult to interpret the underlying problem.
The article that follows will explain some of the factors that may contribute to the occurrence of the boot loop in a Xiaomi phone. In addition to that, it will elaborate on a variety of approaches that can be taken to address and resolve the redmi bootloop issue. Examine each of the approaches, and then choose the one that seems most effective to you.
Causes ‘Xiaomi Phone Stuck in Recovery Mode’ issue
- Corrupted firmware: If your phone’s firmware is corrupted, it could cause the phone to get stuck in recovery mode. The firmware is the software that controls how your phone works, and if it gets messed up, it can cause all kinds of problems.
- Problems with a software update: Sometimes, a software update can make your phone act up and get stuck in recovery mode. This is especially true if the update doesn’t work with your phone’s hardware or if something goes wrong while updating.
- Problems with the phone’s hardware: If your phone’s hardware is broken, it can also get stuck in recovery mode. This could be a problem with the phone’s battery, processor, or some other part.
- Wrong key combination: If you press the wrong key combination by accident, it can also cause your phone to get stuck in recovery mode. This usually happens when you try to enter recovery mode by hand.
How to Fix ‘Xiaomi Phone Stuck in Recovery Mode’ issue
Reboot the Phone
- Press and hold your Xiaomi phone’s “Power” button until the device turns off.
- Wait a few seconds, then press and hold the “Power” button again to turn it back on.
- Check to see if your phone starts up as it should. If it does, then the problem is fixed.
Clear Cache in Recovery Mode
- Put your Xiaomi phone to sleep.
- Hold down the “Volume Up” and “Power” buttons at the same time until the Xiaomi logo shows up.
- Put the device into recovery mode, let go of the buttons.
- You can move around with the volume buttons and use the power button to choose “Wipe cache partition.”
- Confirm the action, and then wait until it’s done.
- After clearing the cache, choose “Reboot system now” to turn your phone back on.
Check Your Side Buttons
- Keep touching your home screen for a while until more options show up.
- select Widgets
- Choose the Lock widget and put it anywhere on the screen you want.
Boot the computer into Safe Mode
- Put your device to sleep.
- Hold down the Power button and the Volume up key until the MIUI logo appears on the screen.
- Use the volume down key to get to Safe Mode, then press the power button to choose it. This will turn on your device and put it into safe mode.
Use Xiaomi’s Mi PC Suite
- Get Mi PC Suite and install it on your computer.
- You can use a USB cable to link your Xiaomi phone to your computer.
- Open Mi PC Suite and wait for your device to show up.
- Follow the steps on the screen to update or fix the firmware on your phone.
FAQs
One of the most common reasons is that one of the buttons used to get to system recovery on an Android device is broken or not working. Now, before you try to get out of Android Recovery Mode, you should check to see if the physical buttons work, especially the volume buttons.
If you can’t get into recovery mode on an Android device, there may be a problem with the system. When your device has been used for a long time, this often happens. In this case, you should use DroidKit – Complete Android Solution to fix the problem with the Android system and get back into its recovery mode.
Hold down the power and volume down buttons until the “loading” screen shows up. Use the volume buttons to move down the list and choose “Recovery mode.” Press the button to turn it on. Once the phone is up and running again, use the volume buttons to choose “Wipe data/factory reset.”
