Gigabyte Aorus FI32U review

The Gigabyte Aorus FI32U is a superb monitor and one of the best 32-inch 4K displays you can buy. Aside from the crystal clear picture quality and impressive speed, it is packed with numerous extras designed to enhance the gaming and computing experience.

A suitable configuration and a minimal investment are still required, however certain models are promoted with alluring technological specs and pricing that “accord” with gamers who seek the finest gaming experience possible. The AORUS FI32U, which is priced at €1,000, joins this market, which only presently offers a few 32-inch models from Asus, AOC, Philips, and Gigabyte.

To win over players with this new screen, Gigabyte, however, has more than one tactic up its sleeve. The usage of a SuperSpeed IPS (SS IPS) panel, the promise of a “ultra-wide” colour gamut, the existence of DSC and HBR3, a KVM capability, or even an ESS SABER audio chip for high-fidelity sound, are advantages that are naturally found on the display technology side.

While maintaining a sober and basic front panel, this monitor does not conceal its goals. The screen only has a thin bezel that is not wider than 0.9 mm, with the exception of tiny curves around the company logo on the lower edge. This leaves a lovely surface for the image. We are dealing with a very aggressive gaming design that still maintains a certain beauty, despite the fact that its foot and back face are deceptive. Such curves, linked with RGB lighting, may not be to everyone’s taste.

Gigabyte Aorus FI32U review: Design

While you turn on the Aorus F132U gaming monitor, it pulls out a battery-operated bullhorn and screams “game monitor” even when it is off. Therefore, you’d better want that. It’s a very lovely monitor in my opinion, and it only sometimes veers into garishness. But not from the front, where its bezel and base evince just a hint of conservatism with their sensible nature and deep-black colouring, even if the sharply obtuse spread of the stand’s feet and the glimmering hint of a diamond-shaped opening beneath the screen hint at quite a bit more.

You can see it when you turn the monitor about in the shape of an insane jumble of burning polygons, which makes you wonder whether the FI32U was made to be seen from behind. The panel stuns with its geometric attention to exorbitant detail, from the starburst pattern carved into the top to the steep plastic slopes that flow around the central support to the three RGB lighting zones.

With that diamond figure expanded at the bottom and two pentagons adorning the top one serving as the monitor’s grip and the other, larger, as the location where the screen attaches to the stand even that support shaft appears to have been carved by geometric artisans.

Gigabyte Aorus FI32U review: Features

Every imaginable option a gamer would desire is available on the FI32U’s OSD. It is summoned with a press and up-click of the joystick. Once more, the user can select four distinct functions that the joystick can quickly access. If they prefer, they can instead utilise the OSD Sidekick app in place of the joystick. Aim Stabilizer Sync, a function that reduces backlight strobe blur, opens the Gaming menu. It’s one of the rare examples of this kind of solution that can cooperate with Adaptive-Sync. Aim Stabilizer Sync improves motion resolution while reducing brightness by only approximately 10%. In order to make shadow areas more visible, utilise Black Equalizer.

You don’t want edge enhancement, which is added by super resolution; instead, it adds white lines around dark objects and lowers resolution. With three levels and a Smart Mode that adjusts the effect according to movement speed, Overdrive is also available. The cleanest moving image was delivered by Overdrive’s Picture Quality setting, in our opinion.

In addition to the three unique memories, the Picture menu contains eight pre-set options. Green is the default, and it provides respectable accuracy even without calibrating. Here, a few adjustments to the gamma and colour temperature enhanced the colour and increased image depth. A 6-axis colour control can also be modified in the custom modes.

DCR and local dimming are the two strategies used for dynamic contrast. In SDR mode, neither performs all that well. Although its impact is subtle, DCR is a little better. Even though local dimming increases contrast, the Gigabyte Aorus FI32U’s overall image is still too dark unless you’re using it in a completely dark room. Use Local Dimming for HDR content as it is far more appropriate for that type of content.

Gigabyte Aorus FI32U review: Image Quality

The Aorus FI32U was also the first 31.5′′ IPS-based monitor to receive the Eyesafe certification, which guarantees reduced emission of hazardous low-blue light even when a dedicated low-blue filter mode is not active and without compromising colour accuracy.

Thanks to the high pixel density of 140 PPI, the 4K UHD quality seems amazing on the monitor’s 31.5-inch-sized screen (pixels per inch). You get clear text and details together with a sizable screen. Some users choose not to scale at all, while others may prefer a scaling factor of 125% to make small print simpler to read. Remember that the latest games require a powerful PC to run at 4K UHD resolution with respectable frame rates and visual settings.

Moving on, the IPS panel of the Gigabyte Aorus FI32U monitor provides 178° of wide viewing angles for faultless image quality no matter the angle you’re looking at the screen from. It produces vibrant colours since it covers 123% of the sRGB colour space and 90% of the DCI-P3 colour space. For more accurate output when viewing SDR content, you may also use the built-in sRGB emulation mode to limit the gamut to 100% sRGB. The brightness can be changed in this mode, but not the other parameters.

Peak brightness for the screen is 350 nits, making it more than bright enough in regular circumstances. An IPS panel display’s usual 1,000:1 contrast ratio is also present. The black levels won’t be as as deep as VA panels with a contrast ratio of 3,000:1, but they’re still respectable. There is also some IPS glow, but it is often totally controllable and fluctuates in strength depending on the monitor’s unit.

Gigabyte Aorus FI32U review: Connectivity

The underside of the screen is where all of the connectivity ports are located. There is an IR Remote, a DisplayPort 1.4 socket, two HDMI 2.1 connections, two USB-A 3.0 ports, USB-B, and USB-C connectors, as well as two 3.5mm audio plugs. Cables for HDMI, DisplayPort, USB-C, and USB-B are provided.

Gigabyte Aorus FI32U review: Display and Performance

The 32-inch Aorus FI32U monitor features a 144Hz refresh rate, a 1ms MPRT response time, and a 3840 x 2160 resolution. The contrast ratio is quoted as 1000:1 like most iPS panels, and the backlight has a 350 to 400 cd/m2 range. Although this device has HDR 400 certification, its HDR performance won’t compare favourably to other, more advanced versions like the PG32UQX.

Since the pixel density isn’t excessively high at this scale, legibility and visibility don’t suffer, making 4K seem more appropriate. The greater pixel count is still present, though, so games and movies will always look fantastic and have a sharp, detailed image. These provide a monitor like the FI32U considerable flexibility because it can be used for both work and play.

Although not the finest, the Aorus FI32U renders 99% sRGB and around 82% DCI-P3, which is sufficient for gaming. Because of its baseline accuracy’s deltaE average of 2.35, most users won’t be able to see colour inaccuracies with the naked eye. After a few minor adjustments, most users will find the screen to be balanced out of the box and satisfactory.

The Aorus FI32U can be used for tasks that requires colour accuracy thanks to its remarkable 0.57 dE average after calibration. To achieve this kind of outcome, a colorimeter is required; however, they are neither inexpensive nor practical, especially for gamers. If you intend to use this monitor for work, we can only advise investing the extra money on it.

This variant’s backlight had an SDR high of 336 cd/m2, however when HDR was turned on, it peaked at 431 cd/m2. Given that it only achieved 1058:1 in SDR and 1104:1 when HDR was on, the contrast is mediocre. The monitor is unable to create deep blacks, and HDR cannot bring significant benefits.

Gigabyte Aorus FI32U review: Price and release date

The Aorus FI32U gaming monitor is currently on sale for $999 and AU$1,499 in the US and Australia, respectively. Release in the UK has reportedly been delayed due to stock concerns. you can buy this product from Gigabyte official store.

Final Words

Excellent for gaming, the Gigabyte FI32U display. It is a wonderful option for gamers using next-generation consoles because it supports HDMI 2.1 and boasts a quick refresh rate, great response time, and little any motion blur. A more immersive gaming experience is delivered by the huge, high-resolution screen. You shouldn’t experience any difficulties playing co-op games because it has outstanding ergonomics and wide viewing angles. On the other hand, when gaming at 60Hz, it has a little bit more input lag than typical.

John Brister
John Brister
Meet John Brister, the prolific content writer renowned for his perceptive comparison articles on Bollyinside. Specializing in topics ranging from TVs to headphones and other accessories, John's knack for breaking down intricate details into reader-friendly insights has garnered him a dedicated following. Beyond his literary pursuits, John is an avid swimmer and equally passionate about tracking, often exploring new trails and routes, feeding his sense of adventure.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related Articles

Hubspot Service Hub review 2024: a comprehensive platform

When it comes to customer support operations, HubSpot Service Hub is an all-encompassing customer service platform that is meant to...
Read more
When players on Windows 11 or 10 try to log in to Steam, they may get the error code E87....
Users of Windows 11 or 10 may find it frustrating to deal with the error number 147-0 in Microsoft Office....
The Microsoft Store is an important part of the Windows operating system because it gives users a single place to...
It can be hard to find the right balance between usefulness, durability, and cost when it comes to kitchen storage....
Both AirDroid and Vysor are well-known tools that help Android users control their devices and mirror them. One of the...
Excellent for gaming, the Gigabyte FI32U display. It's a wonderful option for gamers using next-generation consoles, as it supports HDMI 2.1 and offers a fast refresh rate, great response time, and little motion blur.Gigabyte Aorus FI32U review