This tutorial is about How to change Windows 11 DNS server address. We will try our best so that you understand this guide. I hope you like this blog, How to change Windows 11 DNS server address. If your answer is yes, please do share after reading this.
So lets keep reading for intertesting info:
Check How to change Windows 11 DNS server address
Domain Name System (DNS) is a mechanism that converts domain names (such as Twitter.com) into user-friendly IP addresses (104.244.42.193) in Windows 11 (or any other computer system). To make it easier for you to connect to your favorite websites and services, your Internet Service Provider (ISP) usually provides these settings automatically. On the Internet, there are many other DNS resolvers that are faster, more reliable, better for privacy, and more secure. Cisco, Google and Cloudflare are some of them. You can change DNS addresses in Windows 11 in at least four different ways using Command Prompt, PowerShell, Settings, and Control Panel if your current DNS servers are slow, unreliable, or if you don’t trust your ISP system.
How to change the DNS server address in Windows 11
Use settings to change DNS servers
The “Settings” menu on your PC has many network options to configure. One of these includes changing the DNS server. Here’s how to do it.
- Open the “Start” menu.
- Click “Settings.”
- Open “Network and Internet”.
- Select the “Ethernet” or “Wi-Fi” navigation option.
- Go to the “Advanced” network settings.
- Choose the correct network adapter.
- Click the “View additional properties” option.
- Locate the “DNS Server Mapping”.
- Press the “Edit” button next to it.
- Click the “Manual” option.
- Enable the “IPv4” option.
- Type new servers in the “Preferred and Alternate DNS” spaces.
- Hit “Save.”
Use Control Panel to change the DNS server
Control Panel still has several useful settings even though Microsoft gradually phased it out. Some of the settings you should expect in Control Panel include the adapter settings in the “Network Connections” applet. The applet also allows you to change your DNS server as follows.
- Open the “Power User” menu by pressing “Win + X”.
- Click “Run.”
- Type “Control Panel.”
- Press the “OK” button.
- Find and select “Network and Sharing Center”.
- Open the “Change adapter settings” option.
- Right click on your network adapter.
- Go to “Properties”.
- Open the “Networks” tab.
- Choose “Internet Protocol version 4 (TCP/IPv4)”.
- Click “Properties”.
- Check “Use the following DNS server addresses”.
- Now enter your alternate DNS addresses in the boxes.
- Press OK.”
Use command prompt to change DNS servers
Command Prompt allows you to change your DNS server with style. Here you will find the Netsch command line utility that allows you to change the DNS server as follows.
- Press the “Win + S” key to open the search utility.
- Enter “cmd” in the search text box to find the command prompt.
- Select “Run as administrator”.
- Enter the command below and press “Enter” to see the names of Internet sources.
“netsh interface show interface”
- Make a note of the network on the interface.
- Then enter the netsch command below.
“netsh interface ipv4 set dnsservers “Interface Name” primary static preferred DNS address”
- Press Return.”
- Enter the following command to specify the alternate server address.
“netsh interface ipv4 add dnsservers” interface name “alternate dns address index=2”
First, you need to edit the Interface Name, Preference, and Alternate DNS address details in the commands and enter the actual address and interface details. If you want to use IPv6, you must replace IPv4 in those commands with ipv6.
Use PowerShell to change DNS servers
Windows PowerShell works like Command Prompt, but uses different commands. Here are the steps to change the DNS server.
- Open the Windows 11 search box.
- Type “PowerShell” in the search box.
- Select the “Run as administrator” option.
- Enter the command below.
“Get-AddressDnsClientServer”
- Press “Enter”.
- Write down the InterfaceAlias for your Ethernet or Wi-Fi connection.
- Enter the following command to change the DNS server.
“Set-DNSClientServerAddress “InterfaceAlias” –ServerAddresses (“preferred-DNS-address”, “alternate-DNS-address”)”
Remember that you will need to adjust the InterfaceAlias and the Preferred and Alternate DNS address details in the above command to change the server. This needs to be replaced with actual details. Below is an example of a Wi-Fi Google DNS command.
“Set-DNSClientServerAddress “Wi-Fi” –ServerAddresses(“8.8.8.8”, “8.8.4.4”)”
Change DNS servers with DNS bridge
DNS Jumper is one of several third-party software that changes DNS server settings. You can use DNS Jumper portable utility freely on any Windows platform. Also, Jumper comes with 36 different servers for you to choose from. In other words, you don’t need to find the correct addresses to make the necessary server changes. Follow the steps below.
- Go to the DNS bridge web page.
- Scroll to the bottom of the page and click “Download.”
- Press “Win + E” to open File Explorer.
- Locate and open the folder with the DNS Jumper ZIP.
- Click the “Extract All” option.
- Alternatively, you can click the “Browse” button to choose a different extraction path.
- Once the “Extract Archives” window opens, click the “Show extracted files when complete” option.
- Click “Extract” to access the extracted folder.
- Locate the folder called “DnsJumper” and double click to open.
- Click the dropdown menu next to the “Choose Default DNS Server” option.
- Choose your preferred server option from the popup menu.
DNS server addresses
If you don’t want to involve third parties, such as DNS Jumper, in your server configuration, you have to find and enter the addresses manually. Popular alternatives include OpenDNS, CleanBrowsing, Quad 9, Cloudflare, and Google. We’ve listed the IPv4 addresses for those alternatives below to save you time searching.
- OpenDNS: 208.67.222.222 (main) 208.67.220.220 (alternate)
- CleanBrowsing: 185.228.168.9 (primary) 185.228.169.9 (alternate)
- Google: 8.8.8.8 (primary) 8.8.4.4 (alternate)
- Quad9: 9.9.9.9 (primary) 149.112.112.112 (alternate)
- Cloudflare: 1.1.1.1 (main) 1.0.0.1 (alternative)
Final words: How to change Windows 11 DNS server address
I hope you understand this article, How to change Windows 11 DNS server address. If your answer is no, you can ask anything via the contact forum section related to this article. And if your answer is yes, please share this article with your friends and family to give us your support.
