A driver is a wonderful thing. It can improve your PC and provide a better PC experience. However, if something goes wrong with a driver, it can completely affect the functioning of your PC and lead to errors like the driver power failure. This error is a blue screen error that results from compatibility issues with your driver and can take a long time to fix. But luckily for you, we are here to take that hassle off your hands.
We have compiled a list of solid solutions that you can apply when this error occurs on your PC. Follow these solutions one by one and see which one works best for you. And if that wasn’t enough, we’ve also talked about a powerful data recovery app in case you lose your data while fixing the “power failure” error.
How to Fix Driver Power State Failure Error in Windows PC
Enter Safe Mode and remove recently installed drivers
- Click the Start icon in the taskbar and then right-click the Power button.
- Hold down the Shift key and click Restart.
- Then select Troubleshooting.
- Select Advanced Options, followed by Startup Settings.
- Click the Restart button.
- When your PC boots up, press the 4 or F4 key on your keyboard to enter Safe Mode.
- Next, right-click on the startup icon and select Device Manager.
- Here, expand the section that contains the driver that is giving you problems – there is usually a yellow exclamation mark next to it – and select Uninstall Device.
- Check to see if the error has disappeared. If the Driver Power State Failure stop code persists, you will need to remove another recently installed driver. Repeat this step until your PC is working again.
Driver Power State Failure can probably be fixed by removing recently installed drivers in Safe Mode. Start your PC in Safe Mode first, and then perform the uninstallation via Device Manager.
Perform an SFC scan
- Press Windows key + X and select Command Prompt (Admin) from the list. If Command Prompt is not available, select PowerShell (Admin) instead.
- When Command Prompt opens, type the following command and press Enter to run it:
- The scan will now start. Remember that the SFC scan can take about 10 minutes, so do not interrupt it.
If you can’t run the SFC scan or the scan can’t fix the problem, users recommend using the DISM scan instead. To do this, follow the steps below:
- Open the command prompt as an administrator.
- Run the following commands:
- DISM.exe /Online /Cleanup-image /scanhealth
- DISM.exe /Online /Cleanup-image /Restorehealth
- After you have executed both commands, check if the problem is solved.
Change your Power settings
- Press Windows key + S and type Control Panel. Select Control Panel from the list.
- When Control Panel opens, look for Power Options and click on it.
- Click Select what the power button does.
- Now click Change settings that are currently unavailable.
- Uncheck Disable Quick Start (recommended), Hibernate, and Sleep. Click the Save Changes button.
- Sometimes the Power State Failure driver may appear on Dell devices due to your power settings.
- According to users, you may be able to fix this issue by simply disabling certain power settings as we have shown you above.
We hope our article on “How to Fix Driver Power State Failure Error in Windows PC” will surely help you to do so. Whenever you encounter an error, always try to understand the error first before moving on to the solution. So, in our case the error explains itself very clearly that there are errors in one of the drivers of computer devices or there is an incompatible hardware or in some cases it could be due to the performance settings of the computer.
I hope you understand this article, How to Fix Driver Power State Failure Error in Windows PC.