The error code “error 20” is an issue name that contains information about the malfunction, such as why it occurred, which system component or application malfunctioned, and other details. The numerical code in the issue name typically contains data that can be deciphered by the manufacturer of the faulty component or application.
In this article we will teach you How to Fix Error Code 20. The problem with this code can occur in various locations throughout the system, so even though it contains some details in its name, it is difficult for a user to pinpoint and resolve the issue cause without specific technical knowledge or appropriate software. Below we have mention the steps to How to Fix Error Code 20.
How to Fix Error Code 20
Run Registry Scan
The corruption of the Windows registry is one of the most common causes of errors like this. The Windows registry is essentially a database system that stores all of the most important operating system data, such as user profile settings, Windows configuration data, and power saving settings. When your computer boots up or runs an application or hardware device, it must consult the Windows registry.
However, the Windows registry can become corrupted over time, making it difficult for the operating system to execute and use certain components. To resolve this issue, you must detect, locate, and repair these corrupted registry entries. You will need to use a registry cleaner tool, such as Advanced System Repair Pro, to accomplish this. The procedure is simple: simply download and run a full system scan, then repair any errors that are found.
Run a Virus Scan
Once your system has been infected with a virus, it can begin to corrupt important files and services, impairing overall system functionality. To resolve this issue, you must perform a full system scan. The scanner should be able to detect, locate, and remove any viruses on your system as a result of this process, fixing any resulting errors. That being said, if you do not have an antivirus software installed on your computer.
Repair Windows
This should only be attempted if all other solutions have failed to repair the error and you have confirmed that your printer is not physically damaged. Reinstalling Windows through a repair installation is your best option because you will not lose any of your personal data. However, you will need your Windows CD and a certain level of expertise to do so, so if you have all of the necessary tools.
Set Your Printer to Default
Users selecting the incorrect printer to print their document, image, or spreadsheet is one of the most common causes of error code 20. That is why it is critical that your primary printer be set as the default. This type of action will help to avoid future mishaps.
To do so, simply follow these steps:
- First, log in to your computer as an administrator.
- Once inside, press Windows + R, type Control Printers, and then click OK.
- This will take you to the Printers and Faxes section, where you can right-click on your printer and choose Set as default printer.
- After that, double-click the Printer and then select Properties.
- The Printer Status applet should appear; click Printer -> Properties.
- This should launch the Printer Properties applet, from which you can select Print Test Page.
If the printer is functioning properly, it will print a test page.
Reinstall USB Composite Device
If the previous methods did not resolve the error code 20, you may want to consider reinstalling the USB composite device. The USB composite device is essentially the component that allows your printer to communicate with the computer via the USB port; reinstalling this component has been used to resolve this error in many cases.
To reinstall this device, follow these steps:
- To begin, log into your computer with full administrative privileges.
- Then, press Windows + R, type devmgmt.msc, and press OK.
- This will launch Device Manager; from here, click the + symbol next to Universal Serial Bus Controllers, then right-click on USB Composite Device and choose Uninstall.
- After that, disconnect and then reconnect the printer’s USB cable.
- After the computer reports that it has discovered new hardware, simply follow the onscreen instructions to reinstall the USB Composite Device.
- After that, repeat steps 2 through 5 of Set Your Printer to Default to print a new Test Page.
Reinstall Printer Software
If the preceding steps do not resolve the error code 20, the next solution you should try is to reinstall the printer software. The reinstallation procedure is divided into two parts. The first is the complete removal of the printer software from your computer, including any leftover folders and registry entries.
To do so, use the Express Uninstaller uninstaller, which is designed to not only use the standard InstallShield to remove applications, but also to run independent scans of your hard drive and Windows registry to locate and delete any application fragments left behind.
Final Words
If you received this warning on your computer, it means that there was a problem with your system’s operation. The error code “error 20” is one of the problems that users may experience as a result of incorrect or failed software installation or uninstallation, which may have left invalid entries in system elements.
Other possible causes include improper system shutdown, such as from a power outage, someone with little technical knowledge accidentally deleting a necessary system file or system element entry, and a variety of other factors. After applying all this above solution and still stuck in the same issue than we recommend you to go to their official Microsoft support website and request your problem to be solved.
I hope you understand this article, How to Fix Error Code 20.