Non-Maskable Interrupt, often known as NMI, is a form of hardware interrupt (or signal to the processor) that gives a certain thread or process priority. NMI occurs for two reasons (Non-Maskable Interrupt) A Hardware Failure error is the root cause of the first issue. The “watchdog timer,” on the other hand, is used to track when the kernel locks itself and is the second explanation. In this article we will show you how to Fix NMI HARDWARE FAILURE Blue Screen Error on Windows PC.
This NMI HARDWARE FAILURE problem is typically seen after the installation of new hardware or free software. It might even show up while you’re installing software or using your computer to play games. This NMI hardware failure problem is frequently caused by improperly configured device drivers, device driver conflicts, damaged system files, and faulty disc drives, among other things. Below we have mentioned the steps to Fix NMI HARDWARE FAILURE Blue Screen Error on Windows PC.
How to Fix NMI HARDWARE FAILURE Blue Screen Error on Windows PC
Run the Blue Screen Troubleshooter
In Windows 10/11, you can run the built-in troubleshooter to fix the NMI error.
- Locate the blue screen and select Run the troubleshooter.
- Finish troubleshooting by following the on-screen instructions.
Run the SFC Scan
If the troubleshooter does not work, you can run an SFC scan with System File Checker to detect and repair damaged files.
- Open the command prompt with administrator privileges.
- Type sfc /scannow and press the Enter key.
- This process will take some time, so wait patiently until the process is complete.
Make sure that Windows and all drivers are up to date
Windows Update
The most recent security patches, along with some new features and bug fixes, are frequently included in Windows updates. These bug patches frequently resolve issues with certain hardware or software. Update Windows if Windows 11/Windows 10 NMI hardware failure bothers you. Simply check for updates in the Windows Update interface by going to Settings > Update & Security. Windows will then look for and install any available updates.
Driver Update
Additionally, you must make sure that all device drivers are current because some outdated or corrupted drivers may result in the stop code NMI HARDWARE FAILURE. We advise utilising a specialised driver update application like Driver Easy to update all the drivers. Simply download this utility from the website, run it, then select Scan to begin searching for out-of-date drivers. Click Update to install the most recent dryer after that. Repeat this procedure if you are using the Free edition. Click Update All if Pro is running.
Uninstall Recently Installed Hardware Driver
The NMI hardware failure blue screen problem may be brought on by recent driver installations and hardware modifications. Your computer’s new hardware and drivers might not work together if you install them. You can uninstall the driver by going to Device Manager. Then, visit the hardware manufacturer’s official website, download the appropriate driver, and install it on your PC.
Check for Memory Issues
You can check to see if there are any memory difficulties as often the NMI error is due to RAM problems. Running the Windows Memory Diagnostic Tool will help you identify any memory issues and repair them.
Final Words
The blue screen error known as NMI, or Non-Maskable Interrupt, typically affects Windows 10 and 11 and is brought on by a hardware malfunction. The stop code for the NMI HARDWARE FAILURE BSOD is 0x00000080, and the error code is NMI HARDWARE FAILURE. There’s no need to freak out if you encounter this screen because it can be repaired. Observe the methods listed above.
I hope you understand this article, How to Fix NMI HARDWARE FAILURE Blue Screen Error on Windows PC.
