PS4 SU-42118-6 is a chance update error that occurs during a software update. It locked the PS4 in a restart loop, preventing it from updating to the latest version. The error flashes with a PS4 black screen, displaying a short message that says “An error has occurred. (SU-42118-6)”. Furthermore, it occurs at random and infrequently when your PS4 fails to detect the Blu-ray drive. However, this indicates that there is a problem with the main unit, which is preventing the software update from installing. At the same time, the error is both frustrating and serious. This article is about how to Fix PS4 Error SU-42118-6.
As a result, there is a demand for an immediate resolution. So, our experts conducted research and developed this article, which includes some effective solutions that will get you out of this annoying error in no time. Sony Interactive Entertainment’s PlayStation 4 is one of the company’s most successful ventures to date. The PS4 is becoming increasingly popular, with an increasing number of people joining the PlayStation gaming community.
However, many PS4/PS5 players are experiencing issues with their consoles following the recent update. According to numerous user reports, the console is not booting up and displays the SU-30746-0 error when attempting to connect to the PlayStation Network. Do not be concerned if you have encountered the PS4 update 8.50 error su-42118-6.
Many users have reported system failures following the recent PS4 8.50 update. According to users, when attempting to update the Sony console, the update process fails with an SU-30746-0 error. When this error appears, the PS4 controller also immediately stops working. Furthermore, players have stated that booting the PS4 console into safe mode by unplugging it and holding down the power button for approximately 7 seconds does not help because the entire process requires the use of a controller. Below we have mention the steps to resolve PS4 Error SU-42118-6.
4 Ways to Fix PS4 Error SU-42118-6
Check the Ribbon Connector
Check to see if you have a damaged, broken, or loose ribbon connection. Su-42118-6 ps4 fat can occur if the ribbon connection between your console and the Blu-ray drive is broken or not properly connected. So, if you can’t fix it yourself, take your PS4 to the nearest repair shop, where they will replace the damaged ribbon with a new one.
Restart PS4 in Safe Mode
- Turn off your PS4 by pressing the power button on the front panel.
- Press and hold the power button until you hear the second beep and boot into Safe Mode.
- Now connect the DUALSHOCK 4(DS4) with the USB cable and press the PS button on the controller to pair it.
- Select Restart PS4 and press X to restart your console in Safe Mode.
Deleting And Reinstalling The Update
The first option is to use a wired internet connection to update your console system software and delete the previously installed update file. Now, go to the settings menu and select the “System Software Update” function, then select the “Update Using the Internet” option. To cover all bases, use wired internet only if the Wi-Fi router connection fails.
Try updating system software
Whether you have a problem or not, it is always a good idea to keep the software environment up to date. Connect your PS4 to the internet and see if there is any system software available for installation right now.
What Does PS4 Error SU-42118-6 Mean
When using your PlayStation 4, you may encounter error codes such as SU-41333-4, E-8210604A, CE-43461-8, SU-42118-6, and others. Some of these errors are caused by software issues, while others are not. The PS4 operating system update error SU-42118-6 is not caused by software. We believe that many users have experienced this problem. In most cases, this issue will leave your PS4 in a restart loop if the PS4 software system update is not updated.
What causes this problem? It always happens when the ribbon connector connecting your motherboard to the BD-ROM is damaged. For example, if you disassemble the PS4 console for some reason, such as cleaning it, you will notice this PS4 SU-42118-6 error. You should now be aware that the cause of PS4 error SU-42118-6 is improper PS4 hardware assembly. This can also cause your PS4 to turn off at random. When this occurs on your PS4, the system is unable to communicate with the BD-ROM. As a result, you are unable to successfully update your PS4.
SU-42118-6 has been one of the most difficult error codes to resolve in the PlayStation 4 over the years. For many, this error indicates a serious hardware problem that necessitates opening and possibly repairing the console. This is because SU-42118-6 can indicate that the console is not detecting the blu-ray drive or the hard disc drive due to a broken BD-ROM ribbon connection.
So, here we conclude our article on methods to Fix PS4 Error SU-42118-6. PS4 bugs SU-30746-0 and SU-42118-6 have recently become a source of concern for PlayStation 4 owners. Many users are unaware of the true cause of the problem because only the error code is displayed on the screen. In either of these cases, you may need to replace the BD-ROM ribbon connection or the entire hard disc drive assembly to resolve the SU-42118-6 error on the PS4. If you are facing the similar issues and want to know how to resolve this problem then follow the steps mentioned above. But still if you are facing the same issue again and again after following the steps above then you may also go to their official website and ask for more solutions.
I hope you understand this article, How to Fix PS4 Error SU-42118-6.