With the advancement of technology, the world has become more modern. For example, to preserve our memories, we used stacks of files or hundreds of albums. In this day and age, we simply use SD cards to protect all important data. What should you do if your Memory card is not recognised in Windows 10/11, and what are the reasons for this? This is a panic situation, but don’t worry because there are several options for getting your SD card back up and running. In this article we will try to teach you how to Fix SD Card Not Showing Up on Windows 11.
SD cards are an excellent way to store data and are typically included with cell phones or cameras. If you want to use it on your computer, there is usually a dedicated slot or an external card reader. However, some Windows 11 users have reported that their SD cards are not recognised. Don’t be alarmed if you run into this issue. This article will provide a list of some of the best solutions to this problem. Before diving into the solutions, it’s important to understand why Windows 11 isn’t detecting SD cards.
Despite the fact that SD cards are becoming less popular, many people still use them to store photographs and other types of data. There is usually a dedicated slot for these, or you can view your data on a PC using an external card reader. Now that Windows 11 is in the spotlight, an increasing number of users are investigating this new operating system. However, some of them discover that when they try to access data on the SD card, the SD card does not appear on their Windows 11 computer. Below we have mention the steps to resolve SD Card Not Showing Up on Windows PC. But still if you are facing the same issue again and again after following the steps above then you may also go to their official website and ask for more solutions.
5 Ways to Fix SD Card Not Showing Up on Windows 11
Disable and Enable SD Card Reader
- Open Disk Management on your computer.
- Expand the Memory Technology Devices category. Double-click the card reader to open it, e.g. B.Realtek Card Reader Driver.
- In the pop-up windows, click “Driver” and then click “Disable Device”.
- If prompted to deactivate the device, click Yes.
- Double-click the card reader again to open the Properties window. Click Activate Device to reactivate the device.
Diagnose SD Card Issues and Troubleshooting
- select “Troubleshooting”.
- Select “Hardware and Sound” and then “Hardware and Devices”.
- Follow the on-screen instructions and wait for the problem to be resolved.
Reinstall the Universal Serial Bus Controllers Driver
- Expand Universal Serial Bus Controllers in Device Manager.
- Right-click the drivers and choose Uninstall. When prompted to confirm device uninstallation, click OK.
- Restart Windows PC.
Check SD Card and Change Drive Letter in Disk Management
- Right-click the Start button and select “Disk Management”.
- In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.
- If not, right-click the SD card and select “Change Drive Letter and Paths”.
- Click Add and choose a drive letter, then click OK. Your SD card will show up in File Explorer along with local hard drives.
Clean SD Card and Reader
One of the most common causes of Windows 11/10 can’t read SD card or SD card reader not working is a dirty SD card or a dusty SD card reader. Either can cause poor contact between the card and the reader, resulting in Windows 11/10 not reading the SD card. So, clean your card and remove any dust from the reader before trying the card again. You can also find another PC and test the SD card there to see if it works.
Why is SD card not recognized on Windows 11
- Connection problem: Most of the time, your SD card is not broken, but your connection points are not functioning properly, preventing you from seeing the files on the card.
- Card Is Locked: Your SD card has a small trigger on the side of it. If the SD card has been set to write-protected mode, it cannot be read or detected.
- Improper Operation: Improper operation refers to the act of inserting or removing the SD card while the device is running. Hot plug now primarily supports SD cards, but doing so on purpose can corrupt your device.
- Drive Letter Issue: A missing driver letter is sometimes the cause of the micro SD card not showing up. If the SD card’s driver letter was lost, it would not be displayed in the system.
- Corrupt Driver: The problematic SD card’s drivers are highlighted in yellow in Device Manager, but Windows File Explorer does not recognise them.
- Partition Loss: When your SD card’s partition is deleted, your SD card will be empty. Another reason SD has not recognised the Windows ten system is unallocated space.
- Physical Damage: If your SD card sustains physical damage, such as exposure to water or fire.
You must have been in a similar situation. After days of taking pictures and videos with your smartphone or digital camera, you return home and attempt to transfer everything from memory card to computer for backup or further editing. You connect the memory card adapter to your laptop and launch Windows File Explorer, expecting to see the SD card icon. However, the SD card is not visible in Windows. As a result, you try again and get the same result. You are concerned that the SD card has been damaged and are unsure what to do.
I hope you understand this article, How to Fix SD Card Not Showing Up on Windows 11.