Welcome, Windows users! Is your Windows 10 failing to start up? No worries, we’ve got you covered. In this comprehensive guide, we’ll walk you through the steps to fix the ‘Windows 10 Fails to Start’ issue. Let’s dive in and get your PC up and running again!
Check How to Fix the ‘Windows 10 Fails to Start’ Issue
Like every day, you sit in your chair and press the power button to start your PC. However, to your disappointment, you soon realize that your Windows 10 won’t start up like it did the last time you sat down. This article describes what to do when Windows 10 won’t start and you can’t boot into the recovery environment. A recovery environment is like a small operating system that allows you to troubleshoot when Windows 10 won’t start. There are several troubleshooting steps that users can try, which are outlined below.
Although Microsoft has been constantly improving its Windows operating system, problems like this still occur from time to time. But don’t give up just yet, we have a solution for you. Below, we will go over all the possible methods to restart your computer when Windows won’t start. Let’s start with that right now.
Method 1: Try Windows Safe Mode
Switch to Safe Mode via Windows Restore
Some non-bootable computers stop at the Windows startup screen. However, you can force the computer to enter Safe Mode by interrupting the startup process three times in a row, which will automatically trigger Windows Restore. Once the Windows recovery menu appears, follow these steps:
- Q: How can I switch to Safe Mode via Windows Restore?
A: To switch to Safe Mode via Windows Restore, select Troubleshooting, then Advanced Options, and finally Startup Settings in the ‘Select a recovery option’ window. In Startup Settings, you can restart your computer in Safe Mode, either with the Internet enabled or disabled.
Safe Mode with a Windows 10 Recovery Drive
If you can’t switch to Safe Mode, you’ll need to create a Windows 10 USB recovery drive. The recovery drive contains the Windows 10 Recovery Environment. Here’s how to create one:
- Launch Control Panel and select “Create a recovery drive”.
- Follow the guided instructions to create the recovery drive.
- After creating the recovery drive, enable USB drives as bootable from the POST environment (UEFI or BIOS) of your computer.
- Insert the recovery drive into your computer and reboot.
Method 2: Check Your Battery
If you are using a laptop, battery issues can cause startup problems. Try these steps:
- Try a different charging cable to see if that solves the problem.
- Check that the cable works by trying it on another laptop.
- Remove your system battery and connect the device to a power source. This will help identify if a hardware issue is causing the problem.
Method 3: Disconnect All USB Devices
A conflict with a USB device can sometimes prevent your computer from booting. Try these steps:
- Unplug all USB devices and other unnecessary peripherals.
- Restart your computer.
Method 4: Disable Fast Boot
In your BIOS or UEFI, there is a setting called Fast Boot that allows Windows 10 to boot faster. However, Windows Update can sometimes break Fast Boot support. Here’s how to disable it:
- Access your BIOS/UEFI screen by pressing the Del, F2, or Escape key during boot (the specific key varies depending on your computer).
- Locate and disable the Fast Boot option in the advanced options. Note that some older computers might not have this option.
Method 5: Check Your Other BIOS/UEFI Settings
An incorrectly configured BIOS/UEFI setting can prevent your desktop from booting. Here are some settings to check:
- Secure Boot: An incorrectly configured Secure Boot can cause your computer not to boot. You can disable Secure Boot in the BIOS. Keep in mind that disabling Secure Boot may prevent you from upgrading to Windows 11.
- Compatibility Support Module (CSM): This allows the UEFI system to work like the old MBR system. Make sure it’s configured correctly.
Method 6: Booting into the Command Prompt
If you can still boot to the command prompt, you can use it to perform other troubleshooting procedures. Here’s how:
- Create a boot disk or USB drive with Windows 10 on another computer.
- Enter the BIOS by pressing the key combination specified by your manufacturer (usually displayed next to the manufacturer’s logo during boot).
- Switch to the Boot tab and make the USB or DVD drive the first boot device.
- Insert the disk or drive containing Windows 10, save the settings, and restart your PC.
- When prompted, select Repair Computer, then Troubleshoot, Advanced Options, and finally Command Prompt.
Method 7: Use System Restore or Startup Repair
If you’re already booting Windows 10 from a disc or drive, you can use the System Restore and Startup Repair utilities. These can help you get your PC back up and running. Look for the links on the Advanced Options screen.
More Interesting Info
Windows updates and hardware issues can sometimes cause the ‘Windows 10 Fails to Start’ issue. To stay up to date with the latest tech news and updates, make sure to check out reputable tech websites or subscribe to tech newsletters. Stay informed and keep your system running smoothly!
Remember, troubleshooting computer issues can be challenging, but with patience and the right instructions, you can overcome them. Follow the steps above, and soon your Windows 10 will be running as good as new!
Thank you for reading our guide on how to fix the ‘Windows 10 Fails to Start’ issue. We hope it was helpful and that you can now resolve the problem. If you have any further questions, please don’t hesitate to reach out. Happy troubleshooting!
Finish with a memorable ending that makes our readers feel good. ????