This tutorial is about How to Fix ‘Windows 10 PC Automatically Restarting After Shutdown’ Issue. Recently I updated this tutorial and will try my best so that you understand this guide. I hope you guys like this blog, How to Fix ‘Windows 10 PC Automatically Restarting After Shutdown’ Issue. If your answer is yes after reading the article, please share this article with your friends and family to support us.
Check How to Fix ‘Windows 10 PC Automatically Restarting After Shutdown’ Issue
Countless Windows 10 have complained that their computers have shutdown issues immediately after upgrading to Windows 10. The most common shutdown issues that Windows 10 can bring to any upgraded computer is that the computer will restart rather than always shutting down the user. that closes it. In such cases, your computer will restart 5 to 10 seconds after shutting it down, whether you shut it down by clicking the Shut Down button or giving the command to shut down the computer from a command prompt.
Also, if you put your computer to sleep by clicking the sleep button, it will wake up after 5-10 seconds. Even if your computer goes into sleep mode while in sleep, the screen will turn on again in a few minutes. The only way for Windows 10 users suffering from this problem to turn off their computers is to unplug them, remove the batteries (on laptops), or press and hold the power button for 3-10 seconds (on desktops). .
Run the power troubleshooter
Microsoft’s automated troubleshooting solutions have become very popular over a period of time. These automated troubleshooting solutions help you solve Windows problems with one click. If your computer is having power consumption issues and you want to extend your laptop battery, you may want to give this ATS a try.
This power troubleshooter fixes the following:
- The wireless adapter is not optimized for power saving
- The screen saver is used in place of setting the computer to enter sleep mode
- The period of time before the computer goes to sleep is too long
- The processor minimum state is too high
- The screen brightness is set too high
- The power plan is not configured for the most efficient power plan.
Troubleshoot clean boot state
Perhaps some driver or program is causing this problem. When the computer enters sleep mode, Windows signals all devices to enter sleep mode. But if the controller is corrupted, it may become unresponsive and can prevent the computer from shutting down or entering sleep mode, resulting in a reboot. Boot into a clean boot state and attempt to isolate the offending program or driver by disabling one program after another. Some of the programs known to cause this problem are Gigabyte On / Off Charge, TrendMicro OfficeScan, etc.
Check for Windows update
Look for Windows Update and make sure you have installed all the latest updates, including device drivers.
Unchecked the Automatically restart box
If your Windows is set to automatically restart when it crashes due to a blue screen, maybe it crashes due to some reason during shutdown, causing it to restart. Next, you might want to see if this helps you:
Using the WinX menu, open System. Then click Advanced System Settings> Advanced tab> Startup and Recovery> System Crash. Unchecked the Automatically restart box. Click Apply / OK and exit.
Disable fast startup
Open Power Options> Change what the power buttons do> Change settings that are currently unavailable> Turn off Turn on fast startup. This will disable fast startup.
Update BIOS
You may need to update your BIOS. Unless you are well versed in this piece, we suggest that you do not try it yourself, but take it to a technician.
Final remarks: How to Fix ‘Windows 10 PC Automatically Restarting After Shutdown’ Issue
I hope you understand this article, How to Fix ‘Windows 10 PC Automatically Restarting After Shutdown’ Issue. If your answer is no, you can ask anything via the contact forum section related to this article. And if your answer is yes, please share this article with your friends and family to give us your support.
