Since its release in 2001, Microsoft’s first video game console, the Xbox, has sold over 20 million units worldwide. Despite the Xbox’s impressive power, a long list of well-known video game titles, and the success of the Xbox’s online component, Xbox LIVE, Sony’s PlayStation 2 outsold it. Microsoft was determined to dethrone Sony’s PlayStation as the game industry moved into the next generation of video game technology. Here comes the Xbox 360. This article is about how to Fix Xbox 360 Open Tray error.
Microsoft completely rebuilt the Xbox. The Xbox 360 is a radically different and more powerful machine than its predecessor, from the name to the look to the hardware and features. The Xbox 360 is a complete media centre that allows users to play, network, rip, stream, and download all types of media, including high-definition movies, music, digital photos, and game content. Obviously, you have or have had the “open tray error” on your Xbox 360. When you have a disc in your Xbox 360 and it does not “see” it, it displays the message “open tray” as if there is no disc in your xbox.
There is a similar error, but when you insert a disc, the xbox makes two clicks. The Xbox 360, like all video game consoles, is nothing more than a computer with hardware and software dedicated to running video game software. The original Xbox was essentially a Windows PC with a modified Pentium III processor, some relatively powerful graphics and audio hardware, and a modified version of Microsoft’s Windows 2000 operating system, all packaged in that distinctive black box. Below we have mention the steps to resolve Xbox 360 Open Tray error.
4 Ways to Fix Xbox 360 Open Tray error
Be Violent
That actually helped some people deal with the same problem, for unknown reasons. Users have confirmed that simply being mildly violent with the console by closing and opening the tray repeatedly or pushing the cartridge back and forth works. A little “smack” on top of the Xbox 360 also worked to avoid the problem rather than solve it. This method is also the most straightforward to try before giving up.
Turning Certain Parts to Their Proper Place
- If you have a disc in the console, make sure to eject it and put it somewhere else before continuing.
- Pull the faceplate away from you by inserting your finger into the USB drive port section to the right of the power button and pulling the faceplate toward you. You can be relatively firm while doing this because, unlike later models, the Xbox 360 does not have fragile parts behind the faceplate.
- Poke a large, bent paperclip through the holes in the top row of ventilation spaces on the Xbox 360’s casing, prying up each time, to release the end grilles. This will unhook the clips that hold the grille in place.
- Insert a flathead screwdriver into the space where the grille connects to the console case, and then pry up as you go.
- If your Xbox 360 has a hard drive, remove it first before removing the end grills by simply pulling them away from the Xbox 360’s case.
- Unclip the front of the case, which is held in place by four clips on the front of your console, by pulling its top towards you.
- Unclip the back of the Xbox case and insert your hand into the space on the right where the grille used to be, applying pressure to the casing’s connected halves while inserting the flathead screwdriver into the slots on the back.
- Simply pull off the case’s bottom to remove it. You should be able to see the metal component. Using a Torx screwdriver, remove the screws that hold the top in place.
- Remove the screws that hold the case’s top in place. Use your Torx screwdriver for this; if you come across a screw that won’t fit your screwdriver, don’t try to unscrew it—not it’s required for disassembly. There are six screws in total that must be removed from the metal portion of the case.
- Remove the eject button on the left side of the front part of the console. Gently pry the green ribbon on the left side of the console’s front with your flathead screwdriver.
- Remove the top of the case from the Xbox and inspect the disc tray.
Dismantle Your Xbox and Leave it Like That For a While
- Hold down the power button on the front of the Xbox 360 console until it completely shuts down.
- Unplug the power brick from the Xbox’s back. To ensure that there is no remaining power in the console, press and hold the power button several times.
- After that, disconnect everything from the console, including the controllers and any other hardware you may have connected to it.
- Plug in the power brick and wait for the power brick’s light to change from white to orange.
- Return the Xbox to its normal operating mode and check to see if the Open Tray error code persists.
Forcing the Disc Tray Inside
- Hold down the power button on the front of the Xbox 360 console until it completely shuts down.
- Turn on the Xbox by clicking on the open disc tray and physically push the disc tray back in with enough force to close it manually, but not so much that it knocks the tray off its tracks.
- Wait a few seconds for the tray to stop and the console to recalibrate itself before rebooting the Xbox and checking to see if the problem has been resolved.
Final Words
We hope you like our article on methods to Fix Xbox 360 Open Tray error. Microsoft’s Xbox 360 is a seventh-generation video game console. It is the successor to the original Xbox and the second console in the Xbox family, and it was released on November 22, 2005. As part of the seventh generation of video game consoles, the Xbox 360 competed with Sony’s PlayStation 3 and Nintendo’s Wii.
I hope you understand this article, How to Fix Xbox 360 Open Tray error.
