This tutorial is about How to Get into UEFI or BIOS on Windows 10/11. Recently I updated this tutorial and will try my best so that you understand this guide. I hope you guys like this blog, How to Get into UEFI or BIOS on Windows 10/11. If your answer is yes after reading the article, please share this article with your friends and family to support us.
Table of contents
Check How to Get into UEFI or BIOS on Windows 10/11
Accessing UEFI/BIOS on your Windows computer is essential if you want to change certain firmware and hardware settings. Unfortunately, since BIOS/UEFI are pre-boot environments, you cannot access them through the normal interface of your operating system. But don’t worry, today we will show you how to access UEFI/BIOS in Windows 11 and Windows 10. You may have noticed that we use the terms UEFI and BIOS almost synonymously in this article.
So is there any real difference between the two terms? The answer is yes. UEFI and BIOS are two of the most popular motherboard firmware interfaces. They act as translators between an operating system and its hardware by initializing components and allowing the user to change certain settings. The main difference between BIOS and UEFI is their age. UEFI is a more modern solution that supports faster boot times, better security, and larger hard drives.
Unlike UEFI, the BIOS only supports hard drives up to 2.1TB and must run in a 16-bit processor mode. Also, it does not support cursors or a modern graphical interface.
How to enter UEFI or BIOS in Windows 10/11
Enter BIOS in Windows 11 using a dedicated BIOS key
Every laptop and desktop computer comes with a special key that allows you to access the BIOS during startup. In this section, we have compiled BIOS keys for various laptop and desktop manufacturers. You can find the BIOS hotkey just below and follow the steps to enter BIOS in Windows 11.
BIOS key for laptops:
- HP Notebook BIOS Key: F10 or Esc
- BIOS key for Asus laptops — F2
- Dell Laptop BIOS Key: F2 or F12
- BIOS key for Acer laptops: F2 or DEL
- BIOS key for Lenovo laptops: F2 or Fn + F2
- BIOS key for Samsung laptops — F2
- BIOS key for Sony laptops: F1, F2 or F3
- BIOS key for Toshiba laptops — F2
- BIOS key for Xiaomi laptops — F9 or F12
- BIOS key for Realme laptops — F2
BIOS key for desktop motherboards:
- BIOS key for Asus motherboards: F2 or DEL
- BIOS key for MSI motherboards — DEL
- BIOS key for Gigabyte motherboards — DEL
- BIOS key for ASRock motherboards — F2
- BIOS key for Zebronics motherboards — F2
Go ahead and shut down your computer completely. Now, turn it back on and keep pressing the BIOS key. It will directly open the BIOS on your Windows 11 computer.
Enter BIOS in Windows 11 from Settings
Apart from BIOS hotkey, you can also enter BIOS in Windows 11 from Settings. If the BIOS key mentioned above didn’t work, don’t worry as this method will surely take you to the BIOS screen. Just follow the instructions below.
- Use the Windows 11 keyboard shortcut “Windows + I” to open Settings. Then go to System from the left sidebar and open the “Recovery” setting from the right panel.
- Here, click “Restart Now” next to “Advanced Startup”. If a pop-up window appears, confirm your selection and click “Restart Now”.
- Once you are at the advanced options screen, click on “Troubleshoot” and go to “Advanced Options”.
- Here, click “UEFI Firmware Settings” and choose “Reboot”.
- Now, you will enter the BIOS or UEFI setup page on your Windows 11 PC.
Enter BIOS in Windows 11 from Command Prompt
Command Prompt also allows you to access the BIOS setup page in Windows 11. Just run a command and you will enter the advanced options screen, and you can open the BIOS from there. Is that how it works.
- Press the Windows key once, search for “cmd” and open the command prompt. In this case, you do not need to run the command prompt as an administrator.
- In the CMD window, run the following command. Please note that running this command will instantly reboot your PC, so save all your work before running this command.
- Once your computer restarts, the same advanced options screen will open. Here, go to Troubleshoot -> Advanced Options -> UEFI Firmware Settings -> Reboot.
- You will enter the BIOS on your Windows 11 computer right away.
Final remarks: How to Get into UEFI or BIOS on Windows 10/11
I hope you understand this article, How to Get into UEFI or BIOS on Windows 10/11. If your answer is no, you can ask anything via the contact forum section related to this article. And if your answer is yes, please share this article with your friends and family to give us your support.
