This tutorial is about How to Set up OpenVPN Client on Debian 11 Bullseye. Recently I updated this tutorial and will try my best so that you understand this guide. I hope you guys like this blog, How to Set up OpenVPN Client on Debian 11 Bullseye. If your answer is yes after reading the article, please share this article with your friends and family to support us.
Table of contents
Check How to Set up OpenVPN Client on Debian 11 Bullseye
OpenVPN is open source virtual private network software. It runs as a client-server model. An OpenVPN server runs on a publicly accessible remote computer that you can connect to using the OpenVPN client software installed on your computer. This way you can connect to all the computers and devices running on the remote computer’s network and also use that computer’s Internet connection.
OpenVPN is a fully functional SSL VPN (Virtual Private Network). It implements a secure layer 2 or 3 OSI network extension using the SSL/TLS protocol. It is open source software and is distributed under the GNU GPL license. With a VPN, you can establish a secure connection to an unsecured public network, such as a Wi-Fi network at an airport or hotel. VPN is also required to access the resources of your company, corporate or home server.
You can bypass geo-blocked websites and increase your privacy or security on the Internet. This tutorial provides step-by-step instructions for setting up an OpenVPN server on a Debian Linux 11 server.
How to configure the OpenVPN client on Debian 11 Bullseye
Installing the OpenVPN client
- OpenVPN packages are available in the default Debian repositories. Open a terminal on your Debian system and update the Apt cache on your system. After that, install the OpenVPN package.
- Open a terminal and run the commands to install the openvpn client on Debian:
- sudo apt update
- sudo apt install openvpn -y
Connect to the OpenVPN server
- Copy the openvpn client configuration file to your Debian machine. You can use the –config command line parameter to provide the configuration file. The command will read all the details needed to create a VPN from this file. Let’s run the following command to connect to the openvpn server:
- openvpn –config client.ovpn
Check connection
- Once the connection is successfully established, the OpenVPN server will assign a new IP on the tun0 interface. . You can check it with the following command:
- You can also check the OpenVPN server log to check the connection status:
- tail -f /var/log/openvpn.log
Final remarks: How to Set up OpenVPN Client on Debian 11 Bullseye
I hope you understand this article, How to Set up OpenVPN Client on Debian 11 Bullseye. If your answer is no, you can ask anything via the contact forum section related to this article. And if your answer is yes, please share this article with your friends and family to give us your support.