How to Enter BIOS in HP Laptop

0
263
How to Enter BIOS in HP Laptop

As soon as a computer is turned on, it’s important to check to see if there are any hardware problems that could make the computer less useful. You’ll learn more about the BIOS and why it’s an important part of the booting process to make sure the computer works well and securely. Before you press any keys or change any settings, we’ll show you everything you need to know about your PC’s BIOS and how to enter BIOS in HP laptop.

Basic Input/output System, or BIOS, is a piece of software that is stored on a small memory chip. This software is also called firmware. BIOS is on the motherboard and is the first piece of software that runs when a computer turns on. BIOS tells the computer how to do basic things like start up and control the keyboard.

It is also used to find and set up the computer’s hardware, like the hard drive, CPUs, memory, and other devices. Lastly, it controls the flow of data between the computer’s operating system (OS) and any devices that are connected to it. BIOS firmware is not volatile, which means that its settings are saved and can be retrieved even if the device loses power. Go to their official site for more support.

Enter BIOS in HP Laptop Using hotkey during boot-up

How to Enter BIOS in HP Laptop

Your PC goes through a quick POST process to get your startup screen up as fast as it can. You may not have noticed it because it happens so quickly. During this small window of time, you can also enter BIOS in HP laptop it has set up for you.

When it came to choosing a single BIOS key, different PC brands were all on different pages. Most HP laptops use the F10 or Escape key. The most common hotkeys for PCs are usually DEL and F2, but if you don’t know what your brand’s hotkey is, this list of common BIOS keys by brand may help. HP: ESC or F10

  1. If you press the BIOS hotkey you set up while your computer boots up, you should see the BIOS setup utility screen.
  2. For example, if you have an HP Pavilion, HP EliteBook, HP Stream, HP OMEN, HP ENVY, or other model, you can get to the BIOS setup screen by pressing the F10 key right when your PC status screen comes up.
  3. Some manufacturers want you to press the hotkey more than once, and others want you to press another button along with the hotkey. Check your PC’s user manual or the support page for the manufacturer for the most accurate information.

Enter BIOS in HP Laptop Using Windows 11’s start menu

As technology has gotten better, computers now start up in seconds right in front of our eyes. This leaves little space for hotkeys and can make it hard for people to figure out how to get into their BIOS settings.

This way of getting into BIOS is for PC users who can’t catch that tiny window to use their hotkey. It can be done through your computer settings.

  1. Access your Windows settings
    • Go to the “Start” menu in Windows and click “Settings” on the left side. You can also use the short-cut keys Windows + I to get to your Windows settings.
  2. Select “Update & security”
    • You may have to scroll down in this window to find the “Update & security” button.
  3. Select “Recovery”
  4. Click “Restart now”
    • Under “Advanced startup,” you’ll find a “Restart now” button that lets you turn your PC off and on again to make changes or restore it.
    • When your PC starts up again, you’ll see a special menu with options like “Use a device,” “Continue,” “Turn off your PC,” and “Troubleshoot.”
  5. Select “Troubleshoot”
    • Select “Advanced options” and then “UEFI Firmware Settings” from this window. This lets you get into BIOS on your Windows 11 computer.

FAQs

How do I get into the BIOS on an HP laptop unable?

Press and hold the Windows key and the B key at the same time. Then press and hold the power button for 2 to 3 seconds. Let go of the Power button, but keep holding down the Windows and B keys. There could be a string of beeps. The HP BIOS Update screen comes up, and the recovery process starts on its own.

How do I get into the BIOS on a laptop?

  1. Go to the Settings page. Click on the gear icon on the Start menu to get there.
  2. Choose Update and Security.
  3. Choose Recovery from the menu on the left….
  4. Click Start Over. Now, click on Advanced startup.
  5. Click Fix Problems.
  6. Click on the “Advanced” button.
  7. Click on UEFI Firmware Settings, and then click on Restart.

What is the BIOS key for HP Windows 11?

The HP BIOS Boot menu key is either ESC or F10. This should be written on the BIOS splash screen, unless Fast Boot is turned on, which could also prevent you from getting to the menu.

LEAVE A REPLY

Please enter your comment!
Please enter your name here