Fix the ‘Network Cable Unplugged Error’ Issue in Windows

This tutorial is about Fix the ‘Network Cable Unplugged Error’ Issue in Windows. Recently I updated this tutorial and will try my best so that you understand this guide. I hope you guys like this blog, Fix the ‘Network Cable Unplugged Error’ Issue in Windows. If your answer is yes after reading the article, please share this article with your friends and family to support us.
Table of contents

Check Fix the ‘Network Cable Unplugged Error’ Issue in Windows

Today, the Internet is one of the most important parts of our digital life. Imagine using your computer without the Internet. Many Windows 10 and Windows 11/10 users report that they are facing network cable errors, which means that your computer cannot detect the Ethernet connection properly, leading to errors. The error message is usually displayed on the desktop or notification screen. It can also be displayed in the connection status of the Ethernet network. The error is not specific to the Ethernet connection.

Even if you are using a Wi-Fi connection, it may show up and cause no internet connection. Once you see this error on your computer, it can happen every few hours or days. Internet connection is very important for a computer. If you have a lot to do but can’t access the Internet in Windows 10/8/7, you will be very frustrated.

In Windows 11/10, you usually encounter Internet connectivity issues, such as “No Internet Backup” error message, IPv6 connectivity with no network access, etc. When you open the Network Connections interface, you will find the message “Network cable not connected”. in” in the Ethernet network connection or LAN connection status. This error occurs every few minutes or every few days and can occur even if you are using a Wi-Fi network.

Fix ‘Network cable disconnect error’ issue in Windows

hardware check

Before proceeding with troubleshooting, you need to make sure that your computer’s hardware is not at fault. Try to connect the Ethernet cable to another computer and check if the signal is transmitted correctly. Also, check the ends of the cable for breakage and listen for a ‘click’ when you insert the cable into your computer.

After diagnosing the cable on your computer, diagnose the cable on the router side. Make sure you have plugged it into the correct slot and that the ends present on the router are properly plugged in. Try plugging the end of the cable from the computer into the router and vice versa. Once you’re absolutely sure it’s not a hardware issue, continue.

Change duplex settings

Duplex is a complex system implemented on all computers to manage the communication addresses of your network. The value of this setting is automatic by default; Windows determines the best settings and applies them. After troubleshooting multiple computers, we deduced that it was this setting that caused this error message on most computers. We can try to change this setting and check if this makes any difference in our case. Feel free to revert your changes if this doesn’t work.

  • Press Windows + R, type “devmgmt.msc” and press Enter.
  • Expand ‘Network Adapters’, locate your Ethernet adapter, right-click it and select Properties.
  • Go to the ‘Advanced’ tab. Navigate through all the entries until you find “Speed ​​and Duplex”. Click on it and change its setting from “Auto Negotiation” to “100 Mbps Half Duplex”. Click Apply to save changes and exit.
  • Reboot your computer, reconnect your Ethernet connection, and check if the issue at hand is resolved.

Performing a hard reset

If the above solutions don’t work for you, we can try restarting your computer properly. If it’s a PC, you’ll need to unplug the master power cable for the computer to shut down completely. If you have a laptop, you may need to remove the battery for all the capacitors to discharge. This will ensure that all misconfigurations (if any) are gone and that there is a fresh start when we turn the computer back on.

  • Right-click on the network adapter present on your taskbar and select “Open Network and Sharing Center”.
  • Click on “Change adapter settings” present at the top left of the window.
  • Right click on your Ethernet connection and select “Disable” from the list of options.
  • Disconnect the cable connection and turn off your computer. Pull out the master cable (if it’s a PC) or take out the battery (if it’s a laptop).
  • Wait around 10 minutes. Now connect and turn on your computer. Do not plug in the Ethernet connection yet.
  • Now enable the adapter the same way we disabled it. Now plug in the Ethernet connection and check if the issue is resolved.

Revert to default drivers

The possibility that you have the wrong drivers installed is almost ignored when this error occurs. Windows automatically updates all driver updates through Windows Update. The current driver installed on your computer may not be compatible with or fit your Ethernet hardware. We can try rolling back the drivers and check if this solves the problem.

  • Press Windows + R, type “devmgmt.msc” and press Enter.
  • Once in device manager, expand network adapters and locate your Ethernet hardware. Right click on it and select “Uninstall”.
  • Windows may display a UAC confirming your actions. Press Yes and continue. After uninstalling the driver, right click on any empty space and select “Scan for hardware changes”. Windows will now automatically detect your hardware and install the default drivers. Reboot your computer and check if the issue is resolved.

If rolling back the drivers doesn’t work, we can try to install the latest drivers. You should go to the manufacturer’s website and download the latest drivers to an accessible location. Make sure to download the drivers according to the specifications of your system.

  • Open device manager, right click on your Ethernet hardware and select “Update Driver Software”.
  • Select the second options “Browse my computer for driver software”. Find the driver you downloaded and install it accordingly. Restart your computer and check if the Ethernet cable is detected.

Final remarks: Fix the ‘Network Cable Unplugged Error’ Issue in Windows

I hope you understand this article, Fix the ‘Network Cable Unplugged Error’ Issue in Windows. If your answer is no, you can ask anything via the contact forum section related to this article. And if your answer is yes, please share this article with your friends and family to give us your support.

Editorial Staff
Editorial Staffhttps://www.bollyinside.com
The Bollyinside editorial staff is made up of tech experts with more than 10 years of experience Led by Sumit Chauhan. We started in 2014 and now Bollyinside is a leading tech resource, offering everything from product reviews and tech guides to marketing tips. Think of us as your go-to tech encyclopedia!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related Articles

Best Telemedicine Software: for your healthcare practice

Telemedicine software has transformed my healthcare visits. It's fantastic for patients and doctors since they can obtain aid quickly. I...
Read more
I love microlearning Platforms in today's fast-paced world. Short, focused teachings that engage me are key. Microlearning platforms are great...
Think of a notebook on your computer or tablet that can be changed to fit whatever you want to write...
As of late, Homeschool Apps has gained a lot of popularity, which means that an increasing number of...
From what I've seen, HelpDesk software is essential for modern businesses to run easily. It's especially useful for improving customer...
For all of our important pictures, stories, and drawings, Google Drive is like a big toy box. But sometimes the...