How to Fix Wi-Fi Connection Issues After Sleep on Windows 10

If you’re facing issues with your Wi-Fi connection after the computer wakes up from sleep mode, don’t worry. This guide will help you troubleshoot the problem and fix it in no time. Here are some initial solutions to try before making any changes to your computer:

  • Restart your Wi-Fi router and your PC
  • Check if there are any updates available for your network drivers

Methods to Fix Wi-Fi Connection Issues After Sleep

Try these solutions to fix the Wi-Fi connection problem after sleep mode:

Change Power Management Settings

Make sure that your wireless adapter is not configured to shut down to conserve power when your PC goes into sleep mode. To check and change the power management plan:

  • Go to Device Manager by pressing the Windows logo key + X and choosing Device Manager from the menu.
  • Expand Network Adapters, right-click your adapter, and choose Properties.
  • Click the Power Management tab and uncheck “Allow the computer to turn off this device to save power”.

Uncheck the IPv6 Box

Follow these steps to disable IPv6:

  • Go to the Network and Sharing Center
  • Click Change adapter settings in the left pane
  • Right-click on the connection you’re using and click Properties
  • Uncheck the IPv6 box and click OK

Use the Network Troubleshooter

Run the network troubleshooter by right-clicking the network icon in the lower right corner and selecting Troubleshoot from the menu. Follow the prompts and check if the problem persists.

Change Your Power Settings

Navigate to the System section of the Settings app and scroll down to the Power and Sleep section. Check both boxes in the Wi-Fi section to prevent your computer from turning off your Wi-Fi adapter.

Disable Broadcom Bluetooth

If Broadcom Bluetooth is causing the issue, disable it via Task Manager or Services tab on msconfig. However, keep in mind that this will affect the use of Bluetooth devices.

Disable Your Antivirus

Disable your antivirus or firewall software temporarily or uninstall it completely. A dedicated removal tool is recommended to ensure complete removal of all associated files. Afterward, check if the problem persists.

Make Sure Ethernet is Disabled

Disable your Ethernet connection by selecting Disable from the menu after finding it in the Change adapter settings option in the Network and Sharing Center. Alternatively, simply unplug the Ethernet cable from your PC.

Change Your Connection to Private

Ensure that your network connection is set to private instead of public by enabling the “Make this PC visible” option in the Wi-Fi Properties menu.

Disable “Require Login”

Disable the password log-in feature, which may be interfering with your Wi-Fi connection, via the Login Options under the Accounts section of the Settings app.

Perform a System Restore

If all else fails, try a System Restore by selecting it from the System Properties window under Control Panel.

Conclusion

With these simple troubleshooting tips, you should be able to fix any Wi-Fi connection issues after sleep mode on Windows 10. If you have further questions or concerns, don’t hesitate to contact us via the contact forum section below. Don’t forget to share this article with your friends and family if it helped you.

Frequently Asked Questions (FAQ)

1. My Wi-Fi connection gets disconnected after my computer wakes up from sleep mode on Windows 10. What should I do?

Try some initial solutions like restarting your Wi-Fi router and your computer or checking for updates for your network drivers. If the problem persists, follow the troubleshooting methods mentioned above to fix the Wi-Fi connection issues.

2. How do I disable IPv6 on my Windows 10 PC?

Go to the Network and Sharing Center and click Change adapter settings in the left pane. Then, right-click on the connection you’re using and click Properties. Finally, uncheck the IPv6 box and click OK.

3. Should I disable my antivirus software to fix the Wi-Fi connection issues on Windows 10?

Disabling antivirus software or a third-party firewall temporarily is recommended to check if they’re causing the issue. However, don’t forget to enable your antivirus software again or switch to a different one after resolving the problem.

4. How do I perform a System Restore on Windows 10?

To perform a System Restore on Windows 10, press Windows key + S and type System Restore. Select Create a restore point from the list, and once the System Properties window opens, click on System Restore. Follow the prompts and select the desired restore point.

Editorial Staff
Editorial Staffhttps://www.bollyinside.com
The Bollyinside editorial staff is made up of tech experts with more than 10 years of experience Led by Sumit Chauhan. We started in 2014 and now Bollyinside is a leading tech resource, offering everything from product reviews and tech guides to marketing tips. Think of us as your go-to tech encyclopedia!

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related Articles

Best Telemedicine Software: for your healthcare practice

Telemedicine software has transformed my healthcare visits. It's fantastic for patients and doctors since they can obtain aid quickly. I...
Read more
I love microlearning Platforms in today's fast-paced world. Short, focused teachings that engage me are key. Microlearning platforms are great...
Think of a notebook on your computer or tablet that can be changed to fit whatever you want to write...
As of late, Homeschool Apps has gained a lot of popularity, which means that an increasing number of...
From what I've seen, HelpDesk software is essential for modern businesses to run easily. It's especially useful for improving customer...
For all of our important pictures, stories, and drawings, Google Drive is like a big toy box. But sometimes the...