Putting in the wrong passcode on your Apple Watch more than once and getting locked out is all too common. Do not worry, there is a way to quickly get back in without losing your important data. If you get the annoying “Too Many Passcode Attempts” message on your Apple Watch, you should reset it. In this guide we showed how to Fix Apple Watch ‘Too Many Passcode Attempts’ Issue.
This process will make sure that you can quickly get back to tracking your health metrics, getting notifications, and using your device to its fullest. Even better, this reset won’t delete any of your saved data, so you don’t have to worry about losing anything.
Without much trouble, you can fix this problem with a few easy steps and get your Apple Watch working normally again, so you can go about your daily life as usual. Whether it was an accident or on purpose, knowing how to handle this situation will make sure you can keep using your beloved wearable tech.
Common Causes of the Apple Watch Passcode Issue
- Wrong Passcode: This may seem like a no-brainer, but make sure you enter the right passcode twice. Think about whether you changed it recently and forgot about it.
- Accidental Touches: If the watch screen stays on, touches from clothes, bags, or even pets can be mistaken for passcode attempts and lockouts can happen.
- Wrist Detection: If this feature is turned on, a loose band or bad wearing can make the watch think it’s not on your wrist and ask for a passcode to protect it. Make sure it fits well.
- Software Bugs: Sometimes, software bugs can make it hard to enter a passcode. Do a hard restart on both your watch and your iPhone.
- Hardware Problems: Hardware problems with the touchscreen or display that make your inputs not work right are less common, but they can happen.
Fix: Apple Watch ‘Too Many Passcode Attempts’ Issue
When you unlock your iPhone, turn on “Unlock Apple Watch.”
- Open the app for your Apple Watch and go to My Watch > Passcode.
- Turn on “Unlock with iPhone” and lock and unlock your iPhone.
- Check the iPhone to see if it can start the watch.
- Turn your iPhone on and off after putting the watch on your wrist if this doesn’t work.
- Check to see if the watch can be unlocked.
Use the iPhone to reset or turn off the passcode.
- Open the Watch app.
- Go to “My Watch” > “Passcode” > “Change Passcode.”
- Type in and check the new passcode.
- Use the new passcode to try to open the watch.
- If you still can’t get into the watch, try turning off the passcode in the Watch app and see if that works.
Turn off and on the Apple Watch from your iPhone
- Place the Apple Watch near the iPhone.
- Then, open the Watch app and go to My Watch > General > Reset.
- Choose to delete the apps and settings on your Apple Watch.
- Yes, I want to reset my Apple Watch. Now wait for the process to finish.
- After that, set up the Apple Watch again to see if the issue is fixed.
After a force restart, do a hard reset.
- Press and hold the side button and the Digital Crown button simultaneously.
- Release the buttons when the Apple logo appears on the screen, approximately 10 seconds.
- Count to 4 and then press and hold the side button again until you see the screen displaying “Erase All Content and Settings,” which might take about twenty seconds.
- Tap on the “Reset” button and confirm to initiate the reset process.
- Set up the watch either as a new one or from a backup once the reset is completed.
- If the above steps don’t work, place the watch on charge and simultaneously press and hold the following buttons:
- Release the buttons when the screen goes black.
- Press and hold the side button until the Apple logo appears.
- Release the button when the screen displays “Erase All Content and Settings.”
- After the reset, proceed with the setup and check to see if the problem is resolved.
Press and hold the “Too Many Attempts” message for a while.
- Hold down the Apple Watch’s Digital Crown and side button simultaneously.
- Release the buttons when you see the Apple logo.
- Press the buttons firmly when you encounter the message “Too Many Passcode Attempts“.
- Wait until the screen displaying “Erase All Content and Settings” appears.
- Release your touch and open the watch.
- Turn the watch back on and wait for the process to complete.
- After the reset is finished, proceed to set up the watch again. This should resolve the issue.
FAQs
A: If your Apple Watch has too many password attempts, you can reset it by pressing and holding the side button and Digital Crown together at the same time. This will reset your Apple Watch to its original settings and you’ll be able to set a new passcode.
If you enter the wrong passcode six times in a row, you’ll be locked out of your device, and you’ll receive a message that says iPhone is disabled. If you can’t remember your passcode, you can erase your iPhone with a computer or with recovery mode, then set a new passcode.
If your Apple Watch locks itself without warning, the settings are probably the cause. One feature that might not be on or working right is the Wrist Detection feature. In the Watch app on your iPhone, go to “Passcode” and then “Wrist Detection.” This will let you know if this is true.
