This problem often happens with HP devices and can be caused by a number of things. One reason for this problem could be damaged system files, which can happen after a sudden stop or when malware gets in. Drivers that are out of date or don’t work with your hardware, especially those for HP gear, can also cause this error. In this article we will explain you how to Fix HP Printer Error Code 0x00759c98 on Windows 11/10.
Error code 0x00759c98 HP can also be caused by problems with Windows updates, mistakes in the registry, or conflicts in the system settings. Error Code 0x00759c98 in Windows 11 or 10 is an annoying problem that can stop your system from working normally. This page will give you step-by-step instructions on how to fix this problem in Windows 11 or 10. Stay tuned for a step-by-step guide on how to fix the issue and get the system back to normal.
Why HP Printer Error Code 0x00759c98 on Windows
- Drivers that are missing or out of date: Important software for connecting a printer to a computer may be missing or out of date.
- Conflicting Drivers: Other drivers that are loaded could stop the printer from working properly.
- Bad USB or network connection: A cable that is loose, broken, or not suitable can make it hard to talk.
- Printer Port Setting Wrong: The chosen printer port might not work with the real link.
- Network Interference: Communication can be blocked by firewalls, VPNs, or problems with how the network is set up.
- Outdated Printer Firmware: The software inside the printer may need to be updated.
- Firmware Bugs: Errors can happen when there are very few firmware bugs.
- Windows patches or Problems: Printer problems can happen when Windows has bugs or patches are missing.
Fix: HP Printer Error Code 0x00759c98 on Windows 11/10
Perform a hard reset
- It’s important to make sure the HP printer is off and not plugged in.
- Do not move for 30 seconds.
- Just connect the power line to the printer.
- Press the print button. The problem should be fixed.
Uninstall and reinstall the printer driver after performing a hard reset
- Log in to the Device Manager.
- Make the print lines bigger.
- To get rid of your printer driver, right-click on it and choose “Uninstall device.”
The problem may be with the motor
- Faulty motor can cause an error issue.
- Motors are crucial components driving movement of essential parts like the printhead and carriage assembly.
- Motor malfunction disrupts printer’s internal mechanism, leading to hardware watchdog errors.
- Check ink cartridge, then verify if the motor is working fine or not.
- Seek professional help to check this.
Update or Reinstall the Printer Driver
- Use the Device Manager to begin.
- Click on Print Queues and make the list longer.
- Change the driver and see if the issue is fixed.
- If it keeps happening, choose “Uninstall device” to get rid of your present print drivers.
- Start up your computer again.
- The most recent print drivers will be installed immediately on your device.
Contact HP Support
Even after trying the methods listed above, if the error code still shows up, there may be another hardware problem that needs more investigation. In this case, we suggest that you contact HP Support or get help from a skilled printer repair technician.
FAQs
Based on the code, it’s likely that the reader, a motor, or a lamp is broken. The reader not being able to move is the most likely reason and the easiest to fix.
Take out and put back in the cartridge that is shown. to fix this mistake 2.3 times until it fits securely in the slot, and use a cloth to clean the cartridge contacts. If you still get this message, you can try calling HP’s customer service. The HP team will help you find an answer.
As a first step, you need to change the printer name in Registry Editor. Next, you need to change the RPC connection settings policy. You can run the printer troubleshooter, change the printer preferences settings, and remove the update that’s giving you trouble if these steps don’t fix the problem.
