Everyone who uses a computer has experienced the annoying “No Bootable Image Found” error message. According to this message, the system can’t find the files or devices it needs to start the boot process. As a result, the system can’t start up properly. In this article we showed how to Fix No Bootable Image Found, Notebook will be shutdown.
This could happen for a number of reasons, such as corrupted boot files, BIOS settings that aren’t set up right, missing or broken hardware connections, or even a damaged hard drive. Problem-solving steps can be taken to fix this issue. In some cases, these may include checking the system file for errors, using recovery tools to try to fix the boot sector, or even replacing hardware parts if needed.
By systematically figuring out and fixing the error’s root cause, users can get past the “No Bootable Image Found” problem and get their system working again, preventing the shutdown that was about to happen and making sure that later startup goes smoothly.
Causes of “No Bootable Image Found” Error
Hardware Problems:
- Bad BIOS settings: The BIOS may not have the right boot order, which makes it look for the operating system in the wrong place.
- Damaged or missing boot files: Important files needed for starting up can get lost or damaged.
- Operating system files that are missing: If you delete important system files by accident or your software doesn’t work right, you might be missing these files.
Issues with Hardware:
- Hard drive problem: The operating system could be on a hard drive that isn’t working right.
- Loose cable connections: The cables that connect the hard drive to the motherboard may be broken or loose.
- Faulty disc controller: The piece of hardware that talks to storage devices may not be working properly.
Fix: No Bootable Image Found, Notebook will be shutdown
Change UEFI/BIOS Boot Options
- Turn your PC back on and press the BIOS key to get to the BIOS menu.
- Turn off Secure Boot in System Setup.
- Go to Boot Maintenance Manager > Advanced Boot Options > Boot Mode > Legacy.
- Save the BIOS settings and leave the computer. After that, start up Windows again to see if the problem is gone.
Reset BIOS to Default Settings
- Start up your computer.
- Press F2/F9/F12 or another key as instructed by your manufacturer repeatedly.
- If you’re using a Dell computer, press F9 or Alt + F or click the Load defaults button to load default settings.
- Press ESC and click Make Changes.
- Exit the BIOS setup screen.
- Check if the error is resolved after the system restarts.
Reseat your Hard Disk
- Take the hard drive out of its case.
- Open the case.
- Connect the hard drive again.
- Turn on your laptop.
- Check to see if the problem is fixed.
Replace your drive
- Open the system case and take the drive off of the computer.
- Connect this drive to another computer, if available, and see if your system can find it.
- If it’s not finding anything, it’s clear that this drive’s hardware is broken.
- Then connect a new drive to your computer.
FAQs
Summary: ‘No Bootable image found’ error occurs when the system detects an issue finding the bootable image, file, or disk. You can try changing the Boot Options in BIOS, reseat your hard drive, reinstall OS, or replace the hard drive to fix the error.
You may need to press Del, F2 or other key to get into BIOS, which varies from computer to the other. Go to Boot tab and use instructions given at the bottom or in the right pane to change boot order. Save changes, exit BIOS and restart computer.
/FixBoot. This option writes a new boot sector to the system partition by using a boot sector that’s compatible with Windows Vista or Windows 7. Use this option if one of the following conditions is true: The boot sector was replaced with a nonstandard Windows Vista or Windows 7 boot sector.
