Is your MacBook refusing to turn on? Don’t worry, we’ve got you covered. In this guide, we’ll walk you through the steps to fix the MacBook not turning on issue. So, let’s dive in and get your MacBook up and running again!
Check the Power Connection
The first thing you should do is ensure that your MacBook is properly connected to a power source. Make sure the power cord is securely plugged into both your MacBook and the power outlet. If it’s a laptop, also check that the battery isn’t dead and give it enough time to charge before assuming it’s not working. If needed, try a different power cord or adapter to rule out any issues with the current one.
Perform a Power Cycle
If your MacBook still won’t turn on, performing a power cycle might help. For a MacBook, hold down the power button for ten seconds. You’ll hear a grinding noise as the power is forcibly cut off. Wait for ten seconds and then try booting it up again. If you have a desktop Mac, unplug it and leave it unplugged for at least ten seconds before plugging it back in and attempting to restart.
Check the Display
For desktop Macs, such as the Mac Pro or Mac mini, check if your display is causing the issue. Listen for any startup sounds coming from your Mac. If your Mac turns on but you can’t see anything on the screen, you may have display hardware problems. Make sure all cables are properly connected and try troubleshooting your display based on Apple’s support document.
Start your Mac in Safe Boot
Safe Boot is a useful mode that can help isolate and fix startup issues. To enter Safe Boot on an Intel-powered Mac, start your Mac while holding down the Shift key. For M1-powered Macs, press and hold the power button until you see the startup options, choose the startup disk, and then hold down the Shift key and click “Continue in safe mode.” Once in Safe Boot, you can troubleshoot startup items or reinstall/update software that may be causing the problem.
Reset NVRAM
Resetting the NVRAM (PRAM) on your Mac can help resolve certain issues. On Intel Macs, hold down Command, Option, P, and R keys while turning on the Mac to reset NVRAM. On M1 Macs, use Terminal to reset NVRAM. This step is usually not necessary, but it can occasionally help.
Further Assistance
If none of the above steps resolve the issue, it’s time to seek further assistance. Consider contacting Apple Support or visiting an authorized service center to diagnose and repair the problem with your MacBook.
Conclusion
We’ve covered the essential steps to fix your MacBook not turning on issue. Always start by checking the power connection and ensuring your MacBook is properly connected to a power source. Performing a power cycle and checking the display can also help resolve the issue. If the problem persists, try starting your Mac in Safe Boot or resetting the NVRAM. Remember, if all else fails, reach out to Apple Support or an authorized service center for professional assistance. Now, get your MacBook up and running again!
