Tethering can be a safe alternative to using your phone’s cellular data to connect your devices to the internet. But when you share an internet connection in this way, things might not always go your way. This problem has more than one cause. If you want to fix Wi-Fi USB Tethering not Working.
Some of them are broken USB cables, old drivers, and interference from other wireless technologies. This article will talk about how to fix tethering in general, no matter what kind of tethering you have. But we will talk a little bit about how to fix Bluetooth tethering at the end.
Fix: Wi-Fi USB Tethering not Working
Launch Windows Troubleshooter
- Click right on the Windows icon on the Taskbar. Open the Microsoft Windows Settings.
- Click on the Update and Security category to expand it.
- In the Troubleshoot tab in your left panel choose the relevant device and press the Run the Troubleshooter option present under it.
Turn off Wi-Fi on your Phone
- Open the Settings of your Android or Apple device.
- Click on the WiFi option to expand.
- slide the toggle to turn off WiFi on your device.
Update the network driver
- Press the Win key to open the Start menu.
- Type Device Manager and open it.
- Expand the Network adapters section.
- Double-click on the network hardware.
- Switch to the Driver tab.
- Select Update driver.
Switch Off the Android Phone and Reboot
- Disconnect the USB cord from the Android Phone
- Switch Off the Mobile Phone
- Restart the Phone after two minutes
- Reconnect the Phone to the Laptop using a USB cord
- Try to activate USB tethering
Check Tethering Option
- Open the Phone’s Settings and expand the option Wireless & Networks.
- Turn on the toggle for the Portable hotspot. Check options similar to this if you are unable to find the exact option.
What Causes Tethering to Not Work?
USB, Wi-Fi, and Bluetooth are the three ways to tether. Depending on the type, there are several reasons why tethering might not work. Some of the main reasons why tethering doesn’t work are listed below.
- Wireless interference from other technologies
- The USB cable tethering was broken and wasn’t turned on.
- Firewall Problems
- Damaged USB Port Obsolete Drivers
- Cellular Data Limit Exceeded
- Not Enabled Bluetooth Access Point
- Misarranged APN Settings
Tethering Data vs. Wi-Fi
The important thing to remember is that tethering lets you share the Internet connection of one device with another. If your phone is connected to mobile data (3G, 4G, LTE, etc.) and you turn on tethering, you share the data connection from your phone. That means that if your mobile carrier charges by the megabyte or gigabyte, you may have to pay for it.
On the other hand, if your phone is connected to Wi-Fi (which you probably have access to or can ask for the password for at home, school, work, coffee shops, hotels, airports, etc.), then you can send and receive messages. If you have tethering turned on, you can share your phone’s Wi-Fi connection for free. This could be useful if you’re staying somewhere that limits how many devices you can connect to WiFi.
FAQs
Turn Bluetooth off on your PC. Turn your PC’s Wi-Fi off and on. Make sure you are inside your cellular carrier’s network. If you’re using your phone as a hotspot, make sure it’s properly set up to provide a signal.
Go to Device Manager, double click Network Adapters right-click your device select Disable. Again, right-click on it > select Enable, which should Fix USB Tethering Not Working in Windows 10.
